Box Type L Leg 30 Ton Gantry Crane Single Girder For Workshop
Loading And Unloading
Introduction:
The single main girder gantry crane has a simple structure, is
convenient to manufacture and install, and has a small weight.
Compared with the double girder gantry crane, the overall rigidity
is weaker. Therefore, when the lifting capacity Q≤50t and the span
S≤35m, this form can be used. Single main girder gantry crane
gantry legs are available in two forms: L type and C type. The
L-type is easy to manufacture and install, has good stress
condition, and its own quality is small. However, the space for
lifting goods through the outrigger is relatively small. The legs
of the C-type are inclined or curved in order to have a large
lateral space so that the goods can pass through the legs smoothly.
Product Features:
1. Simple and compact structure, steady performance.
2. Easy to install and high efficiency.
3. Overload, low voltage protective device.
4. Pendent control and remote control.
5. Easy maintenance.
Technical Parameter:
Lifting Weight(t) | 3 | 5 | 10 | 16 | 20 |
Span(m) | 12/16/20/24 | 12/16/20/24/30 | 12/16/20/24/30 | 12/16/20/24/30 | 12/16/20/24/30 |
Lifting Height(m) | 6/9 | 6/9 | 6/9 | 6/9 | 6/9 |
Working Grade | A5 | A5 | A5 | A5 | A5 |
Steel Track Recommended | | | | | |
Power Supply | 3PH, 380V, 50HZ | 3PH, 380V, 50HZ | 3PH, 380V, 50HZ | 3PH, 380V, 50HZ | 3PH, 380V, 50HZ |
Application:
Gantry cranes are mainly used for the loading and unloading of
outdoor cargo yards, stockyards and bulk cargoes. Its metal
structure is like a door-shaped frame, and two feet are installed
under the bearing main beam, which can walk directly on the track
on the ground, and the two ends of the main beam can have outrigger
cantilevers. Gantry cranes have the characteristics of high site
utilization, large operating range, wide adaptability and strong
versatility, and are widely used in port cargo yards.
Photos:
